[en] In this paper, an innovative system combining a heat pump (HP) and an organic Rankine cycle (ORC) process is proposed. This system is integrated with a solar roof, which is used as a thermal source to provide heat in winter months (HP mode) and electricity in summer months (ORC mode) when an excess irradiation is available on the solar roof. The main advantage of the proposed unit is its similarity with a traditional HP: the HP/ORC unit only requires the addition of a pump and four-way valves compared to a simple HP, which can be achieved at a low cost. A methodology for the optimal sizing and design of the system is proposed, based on the optimization of both continuous parameters such as heat exchanger size or discrete variables such as working fluid. The methodology is based on yearly simulations, aimed at optimizing the system performance (the net yearly power generation) over its whole operating range instead of just nominal sizing operating conditions. The simulations allow evaluating the amount of thermal energy and electricity generated throughout the year, yielding a net electric power output of 3496 kWh throughout the year.
Disciplines :
Energy
Author, co-author :
Quoilin, Sylvain ; Université de Liège > Département d'aérospatiale et mécanique > Systèmes énergétiques
Dumont, Olivier ; Université de Liège > Département d'aérospatiale et mécanique > Systèmes énergétiques
Harley Hansen, Kristian
Lemort, Vincent ; Université de Liège > Département d'aérospatiale et mécanique > Systèmes énergétiques
Language :
English
Title :
Design, Modeling, and Performance Optimization of a Reversible Heat Pump/Organic Rankine Cycle System for Domestic Application
Publication date :
August 2015
Journal title :
Journal of Engineering for Gas Turbines and Power
ISSN :
0742-4795
eISSN :
1528-8919
Publisher :
American Society of Mechanical Engineers, New-York, United States - New York
Bettgenhäuser, K., Offermann, M., Boermans, T., Bosquet, M., Grözinger, J., von Manteuffel, B., and Surmeli, N., 2013, "Heat Pump Implementation Scenarios Until 2030: An Analysis of the Technology's Potential in the Building Sector of Austria, Belgium, Germany, Spain, France, Italy, Sweden and the United Kingdom," ECOFYS Germany GmbH, Köln, Germany, ECOFYS Report, Project No. BUIDE12080.
Quoilin, S., van Den Broek, M., Declaye, S., Dewallef, P., and Lemort, V., 2013, "Techno-Economic Survey of Organic Rankine Cycle (ORC) Systems," Renewable Sustainable Energy Rev., 22, pp. 168-186.
Persson, J. G., 1990, "Performance Mapping Versus Design Parameters for Screw Compressors and Other Displacement Compressor Types," Screw Machine '90: Screw Compressors, Screw Loader, Screw Motors: Conference Dortmund, Dusseldorf, Germany, Oct. 2-3, VDI-Berichte 859, pp. 15-31.
Schimpf, S., and Span, R., 2015, "Simulation of a Solar Assisted Combined Heat Pump-Organic Rankine Cycle-System," Energy Conver. Mangmnt., 102, pp. 151-160.
Zanelli, R., and Favrat, D., 1994, "Experimental Investigation of a Hermetic Scroll Expander-Generator," 12th International Compressor Engineering Conference, West Lafayette, IN, July 19-22, pp. 459-464.
Quoilin, S., 2011, "Sustainable Energy Conversion Through the Use of Organic Rankine Cycles for Waste Heat Recovery and Solar Applications," Ph.D. thesis, University of Liege, Liege, Belgium.
Thonon, B., 1995, "Recent Research and Developments in Plate Heat Exchangers," Fuel Energy Abstr., 36(5), p. 361.
Kuo, W. S., Lie, Y. M., Hsieh, Y. Y., and Lin, T. F., 2005, "Condensation Heat Transfer and Pressure Drop of Refrigerant R-410A Flow in a Vertical Plate Heat Exchanger," Int. J. Heat Mass Transfer, 48(25-26), pp. 5205-5220.
Hsieh, Y. Y., and Lin, T. F., 2002, "Saturated Flow Boiling Heat Transfer and Pressure Drop of Refrigerant R-410A in a Vertical Plate Heat Exchanger," Int. J. Heat Mass Transfer, 45(5), pp. 1033-1044.
CEN, 2005, "Refrigerant Compressors-Rating Conditions, Tolerances and Presentation of Manufacturer's Performance Data," European Committee for Standardization, Bruxelles, Belgium, European Standard EN 12900:2005:E.
Lemort, V., Declaye, S., and Quoilin, S., 2011, "Experimental Characterization of a Hermetic Scroll Expander for Use in a Micro-Scale Rankine Cycle," Proc. Inst. Mech. Eng., Part A, 226(1), pp. 126-136.
Lemort, V., 2009, "Contribution to the Characterization of Scroll Machines in Compressor and Expander Modes," Ph.D. thesis, University of Liege, Liege, Belgium.
Quoilin, S., Declaye, S., Tchanche, B. F., and Lemort, V., 2011, "Thermo-Economic Optimization of Waste Heat Recovery Organic Rankine Cycles," Appl. Therm. Eng., 31(14-15), pp. 2885-2893.
Kreider, J. F., Curtiss, P., and Rabl, A., 2009, Heating and Cooling of Buildings, 2nd ed., McGraw-Hill, New York.